FREZZATTI collection — milled interior doors

In FREZZATTI the pattern is not applied to the leaf — it is cut into it. The cutter removes material and the relief becomes part of the door: unlike moulding, it cannot peel off or be knocked loose by a corner of furniture.

Fourteen models, from one or two lines to dense geometry across the whole leaf. Thickness 34 mm.

Two ways to get the colour. The first is to choose from 12 ready films: white, anthracite, feldgrau, three oxides, several oaks, wenge. The colour is known in advance and production runs to standard lead times.

The second is to give a RAL or NCS code. The leaf is then painted to order, and the frame, architrave and extension can be painted to match — the door reads as a single mass with no foreign parts. This is the option usually chosen when there is a design project with specified colours. A smooth leaf with the same precise RAL painting is available in the PERFETTO collection.

One thing worth understanding: painted relief reads differently from film. Matt paint casts a soft shadow in the grooves; film gives a sharper, glossier line. If the pattern is what matters most to you, that is an argument for paint. See "How to choose interior doors" for the bigger picture.

The frame is telescopic, 80, 100 or 120 mm. For RAL/NCS models the frame, architrave and extension are supplied as separate painted items.

Sizes. Width 400–900 mm, height 1800–2100 mm in 50 mm steps, no surcharge within that range.